C2000L Front only Parking Sensor Kit is for
vehicles that already have rear parking sensors fitted.
Supplied boxed, containing:
Central Processor Unit
Buzzer with Self Adhesive Pad
2 Round Recessed Sensors
suitable for plastic bumpers with 6 metre long cables
Pack of 2 Angled collars
21mm Hole Saw for drilling sensor
holes
Installation Instructions
12 Month Warranty
Click
here to Listen to a demonstration of the sound emitted from this
Parking Sensor Kit.
A standard reverse parking sensor kit cannot be fitted to the front of
vehicles because the sensor cable lengths are normally too short to route the
cables safely around the engine bay. The CPU (Control Box) needs to be mounted
somewhere clean and dry, beneath the dashboard. The standard "sensor to CPU"
cable length is 2.4 metres, this kit is supplied with 6 metre cable lengths at no
extra charge.
System Activation
Front Parking Sensor Kit must be operated
via dashboard mounted switch or Front Sensor kit Smart Switch which are
available as optional extras. Please select your preferred option below.
This
system has a
3-stage audible alert that gives
audible beeps with increasing frequency as you get closer to an obstacle.
Stage
Distance
Area
Sound
1
100-150cm
Safe Mode
Bi---Bi---Bi
2
30-90cm
Alarm mode
Bi-Bi-Bi
3
0-30cm
Danger Mode
Bi------
Sensors:
The sensors should be mounted on a vertical surface at 50cm or higher from the
ground.
The sensors are
supplied with optional angled collars that fit between the bumper and sensor to
enable you to angle the face of the sensors away from the ground if you are fitting them to a vehicle with a
curved bumper.
All our sensors are supplied in black. If you want
the sensors colour coded then they can be spray painted using the same paint and
colour as your car.
Dimensions:
Sensors:
Outer Diameter: 25mm.
Depth: 23mm.
Hole required: 21mm
Cable Length:
2.4 metre
Buzzer:
Diameter: 40mm.
Depth 18mm.
Cable length: 2.4 metre
CPU
Size: 100mm x 72mm x 25mm
Power cable length: 1.0 metre
Wiring and Installation
The components are supplied pre-plugged
and ready to install, with the exception of the following two wires that
must be connected to the vehicle:
+ Red Wire: Connect to
selected manual or automatic switch.
- Black Wire: Connect to a negative power supply
(Ground/Car Body).
This item is in Stock and Next day delivery is available as an option for orders received by 2pm
Description
Retail
Price including VAT and delivery
within UK
Click to Order
C2000L Front Audible Parking Sensor kit
with 4 sensors
Only £39.99
including
Delivery & VAT
The price
you see is the price you pay, there are NO hidden extras. All our prices
include VAT and delivery within the United Kingdom
Front
Parking Sensor Kit must be operated via dashboard mounted switch or Front Sensor
kit Smart Switch which are available as optional extras:
Front Sensor Switch
Item
Price
Order
Round
Rocker Switch to manually operate front
Parking Sensors. Dash
mounted switch to enable the manual switching of front parking sensor
kit. Requires 20.4mm hole. Body has a 2mm wide locating lug for which a
slot must be provided in the edge of the hole to prevent rotation.
£10.00
including
Delivery & VAT
30SH. Front
Parking Sensor Smart Switch, to automatically power a front parking sensor
kit when reverse gear is engaged and maintain power for approximately 30
seconds following the disengagement of reverse gear.